אתה לא מחובר.

תפריט 054-219-4545
טלפון
054-219-4545
03-620-6635
מיקום
המלאכה 9 חולון
תמונה ראשית

TH uno | 2300W POWER AMPLIFIER

תמונה קטנה תמונה קטנה תמונה קטנה
סרטון
תיאור המוצר
The Thesis TH amplifiers are manufactured using state-of-the-art analog and digital technology. Class A amplification stage, multi-standard analog and digital inputs and the control of the amplifier through a microprocessor make this product the most evolved among the Audison range.
TH uno is a single channel (mono) amplifier used to achieve maximum performance under any load; capable of delivering up to 2300 W into 1 Ohm and 200 W in the audiophile A Class mode. Specifically designed to drive systems and subwoofers with self-assured mastery.

Power Output

  Load Imp. Mono
Dual Power – Hi-Current 4 Ohm 850 W x 1
  2 Ohm 1500 W x 1
  1 Ohm 2300 W x 1
Dual Power – A Class 4 Ohm 200 W x 1
Amp Chain 2 Ohm (2 Amp) 4500 W x 1

Features
  • DRC – Digital Remote Control
    The DRC mounted in the vehicle dashboard provides access to the functions of all the Thesis amplifiers installed in the system, all within your immediate grasp.
    Providing source selection between analog and optical inputs, it also controls the essential functions you need to access frequently.
מפרט טכני
  • Power Supply :
    Voltage:  
    11 ÷ 15 VDC
    Idling current (@ Dual Power Setting):   2.2 ÷ 8.5 A
    Idling current when off:   0.04 mA
    Consumption @ 14.4 VDC, 1 Ω, Max Musical Power:   132 A
    Remote In: 7 ÷ 15 VDC (1 mA)
    Remote Out:   12 VDC (20 mA)
    Fuse (AFS):   150 A
  • Amplifier stage :
    Distortion – THD @1 kHz, 4 Ω; 90%Power:   0.01 %
    Bandwidth @ -3 dB, 2 VRMS, 4 Ω:   5 ÷ 40k Hz
    S/Nratio@Aweighted, 1V,MaxPower:   106 dBA
    Damping factor @ 1 kHz, 2 VRMS, 4 Ω:   500
    Pre-In sensitivity:   0.3 ÷ 4.8 VRMS
    Pre-In impedance:   15 kΩ
    Loadimpedance (Min @DualPowerMode- Hi-Current):
    • 1 Ch   1 Ω
    Nominal power (RMS) @ 12 VDC, 1% THD:
    Dual Power Mode – Hi-Current:
    • 1 Ch @ 4 Ω   590 W x 1
    Dual Power Mode – A Class:
    • 1 Ch @ 4 Ω   165 W x 1
    Output power (RMS) @ 14.4 VDC, 1% THD:
    Dual Power Mode – Hi-Current:
    • 1 Ch @ 4 Ω   850 W x 1
    • 1 Ch @ 2 Ω   1500 W x 1
    • 1 Ch @ 1 Ω   2300 W x 1
    Dual Power Mode – A Class:
    • 1 Ch @ 4 Ω   200 W x 1
    Amp Chain Mode (two linked amplifiers):
    • 4 Ω   3000 W
    • 2 Ω   4500 W
  • CEA SPECIFICATION :
    Output power @ 4 Ω, 1% THD+N, 14.4 V:   700 W x 1 Ch
    SN ratio (ref. 1 W output):   75 dBA
  • Other functions :
    ASC (Audison Status Controller) FUNCTIONS
    AMP IDentifications, DUAL POWER settings,
    AD Link inputs, AC Link digital bus, DRC controls,
    ACNet software, Status Monitor, Protections
  • Inputs/Outputs/Filters :
    Inputs:   PRE – S/PDIF (Max 192 kHz / 24 bit) Optical and AD Link
    Outputs:   PRE Bypass / AD Link
    Filters:   Removable kit: (Hi-pass / Lo-pass / Bandpass 12/24dB)
    32 steps 18 ÷ 7.5k Hz with 8 standard & 2 customizable modules
    Special Function (Linked Amplifiers):   Master/Slave Bridged; Slave Chain
  • Size :
    Max size (mm/inches):   259 x 510 x 67 / 10”1/4 x 20”1/8 x 2”11/16
    Weight (kg/lb):   10,3 / 22.71
סרטון