Provided with a 32 bit, 147 MHz clock speed DSP as well as 24 bit A/D and D/A converters, bit Ten is controlled by a software especially developed for signal treatment according to the vehicle acoustic peculiarities.
Setting the parameters of each input single channel, setting the delays according to the listening position, adjusting crossovers and equalizers for each of the 5 output channels; all of these operations can be managed by the PC.
During the installation phase, after converting the analog signal into digital, bit Ten automatically reconstructs a digital full-bandwidth stereo signal; de-equalizes the frequency response and, if necessary, reconstructs the central and subwoofer channels.
The user can configure the output mode of each channel relative to the installed system.
It is designed to be connected with the DRC, Digital Remote Control (optional).
- DRC – Digital Remote Control
DRC is the digital interface between the bit processors and the user.
DRC mounted in the vehicle dashboard with bit Ten processor, provides:
– ability to select between main and aux inputs
– control of master volume, subwoofer volume, balance and fader
– ability to choose between 2 user-defined memory presets for equalizer, crossover and time alignment settings.
- ECK DRC
DRC cable extension kit, for installations on especially long vehicles.
- RCA Adapter Cable
Essential connector making link fast and effortless. It expedites connections between the head unit PRE OUTs (2 V min.) and the bit Ten Hi-Level inputs.
- SPM4 – 4 Ch Stereo Passive Mixer
Recommended to extend the number of inputs of bit One processor because they feature a De-equalizer (De-Eq). In that case, any possible non-linear acoustic emissions due to the mixing of the pre-existing filtered channels are duly compensated.
- DRC MP – Digital Remote Control Multimedia Play (OPTIONAL)
The new Audison DRC MP (Digital Remote Control Multimedia Play) is compatible with all the Audison electronics featuring AC Link bus. Its slim profile along with the holder supplied with it eases the installation in the best position inside the car. Thanks to the new Joystick, “Rubber Touch” finished for best control of the movements along the four direction axes, the 'DRC Settings' menu can be adjusted and navigation is also possible through the 'Navy Command' function if the system features an Audison bit Play HD with video output connected to a monitor.
- Power Supply :
Voltage 11 ÷ 15 VDC
Idling current 0.4 A
Switched off without DRC 2.5 mA
Switched off with DRC 4 mA
Remote IN voltage 7 ÷ 15 VDC (1.3 mA)
Remote OUT voltage 12 VDC (130 mA)
- Signal Stage :
Distortion-THD @ 1 kHz, 1V RMS Output 0.005 %
Bandwidth @ -3 dB 10 ÷ 22k Hz
S/N Ratio @ weighted
Master Input 95 dBA
Aux Input 96 dBA
Channel Separation (@ 1 kHz) 85 dB
Input sensitivity (Speaker In) 2 ÷ 15 V RMS
Input sensitivity (AUX in) 0.6 ÷ 5 V RMS
Input sensitivity (PHONE) 2 ÷ 15 V RMS
Input impedance (Speaker In) 2,2 kΩ
Input impedance (AUX in) 15 kΩ
Input impedance (PHONE) 2,2 kΩ
Max Output Level (RMS) @ 0.1% THD 4 V RMS
- Input Stage :
High Level (Speaker) FL – FR – RL – RR – PHONE IN
Low Level (Pre) AUX IN
- Output Stage :
Low Level Pre (Default) FRONT L/R, REAR L/R, SUB
- Connection :
From / to personal computer 1 x USB / B (1.1/2.0)
Crossover N.5 (one eace output channel)
Mode Full / High Pass/ Low Pass/ Band Pass
Type and slope
Linkwitz @ 12/24 dB
Butterworth @ 6/12/18/24 dB
Crossover frequency 68 steps @ 20 ÷20k Hz
Phase control 0° ÷ 180°
- Equalizer :
Hi-Level Input (Speaker In) Automatic De-Equalization
Outputs N.5 Graphic: ± 12 dB @ 31 Band ISO 1/3 Oct. 20 ÷ 20k Hz
- Time Alignment :
Distance 0 ÷ 510 cm / 0 ÷ 200.8 in.
Delay 0 ÷ 15 ms
Step 0,08 ms; 2,8 cm / 1.1 in.
Fine set 0,02 ms; 0,7 cm / 0.27 in.
- Size :
W x H x D (mm / in.) 191 x 34 x 131 / 7.51 x 1.33x 4.76
Weight (kg / lb.) 0,6 /1.322