אתה לא מחובר.

תפריט 054-219-4545
טלפון
054-219-4545
03-620-6635
מיקום
המלאכה 9 חולון
תמונה ראשית

APBX 8 R | REFLEX SUB BOX

תמונה קטנה תמונה קטנה תמונה קטנה
סרטון
תיאור המוצר
The APBX 8 R loaded enclosure was developed with reflex loading, with tuning designed to concentrate SPL in the lowest frequency range. The aim was to exploit the natural boost in output found in most cars below 60 Hz known as “cabin gain”. The 8-inch single 4 Ω voice-coil subwoofer has a powerful motor that maximizes efficiency in combination with the AP8.9 bit amplifier. The low-resonant frequency of the subwoofer, matched to the reflex enclosure keeps excursion low within the entire audio spectrum, allowing also the use with a pair of AP4.9 bit / AP4 D bridged channels, capable of delivering 260 W rms.

1 Ultra-low profile (5.16 in. / 131 mm) box with slot-ported design
perfectly tuned to fully exploit the APS 8 R driver.
2 2S² (2 Sides/2 Sounds) design provides the ability to
choose between Down-Firing mounting to increase the lowfrequency
extension and Up-Firing install to obtain
more punch and definition.
3 Levelling feet with velcro inserts included for a secure grip with
the carpet while maintaining easy removal.
4 SSP (Sub Smart Plug) features both traditional push contacts and
a Plug-&-Play terminal block to easily configure the impedance as
required and provides a quick release.
5 Rounded corners allow easy positioning in the trunk and act as
reinforcement to reduce enclosure resonance.
6 Special designed cone-dustcap-basket geometry which
guarantees a long linear excursion capability (9 mm, one-way).
7 Massive driver motor assembly, optimized with FEM (Finite
Element Modeling) for perfect control under high excursion
conditions.
8 Water-repellent treated paper 8 in. cone, featuring a profile
developed with FEM and optimized with the Klippel Scan
Vibrometer.
9 Specifically developed to be combined with either the AP8.9 bit
(2 CH bridged) or AP4.9 bit /AP4 D (2 CH bridged) amplifiers
taking advantage of the bass boost feature and integrated
parametric equalizer of the built-in DSP.
10 Sturdy metal grid included for a total protection of the subwoofer
driver.


Technical Data

Comp REFLEX SUB BOX
Size 200 mm (8")
Power Handling 250 W Continuous Power
500 W Peak Power
Impedance 4 Ω
Sub box size mm (in.) 473 (18.62) x 334 (13.15) x 109 (4.29)
Magnet High density flux ferrite
Cone Cotton-Fibre pressed paper
Weight of one component kg (lb) 6,64 (14.64)

 

מפרט טכני
  • TECHNICAL SPECIFICATIONS :
  • Component   REFLEX SUB BOX
  • Subwoofer size mm (in.)   200 (8)
  • Subwoofer Voice coil Ø mm (in.)   40 (1.57)
  • Power handling W
    peak   500
    continuous   250
  • Impedance Ω   4
  • Sub box size mm (in.)   473 (18.62) x 334 (13.15) x 109 (4.29)
  • Weight of one component kg (lb)   6,64 (14.64)
  • Magnet   High density flux ferrite
  • Cone   Water-repellent treated paper
סרטון